The 12″ x 24″ Kue Ken 56 Jaw Crusher with jaw dies reported at 70% has been inspected and test run, and includes 20 HP motor. Equip yourself with the gold standard.
Manufacture & Design
- Rated throughput 20 – 65 standard Tons per hour
- Closed side setting 1″ – 3″ (25 – 75 mm, approximately)
- Weight 7,250 lbs. (approximate)
Components & Inclusions
- Jaw dies reported at 70%
- Bearings in good condition
- 20 HP (15 KW) electric motor
- 1800 RPM
- has been tested
Crushing Without Rubbing *
Kue Ken crushers crush by pressure only with no rubbing and minimum abrasion. The moving jaw hinge pin is located on the center line of the crushing zone formed by the two jaw plates. The moving jaw, swinging freely from the hinge pin, follows and arc path. Rock is gripped squarely immediately and crushed without rubbing or abrasion. The location of the hinge pin results in less stroke at the bottom of the jaw for more uniform product with less bearing load on the hinge pin.
* as per Kue Ken brochure