Description
Metso Column Flotation Cells, Skid Mounted, New Unused, 2 Cells @ 1m dia. x 9.5m, 2 Cells @ 1.5m dia. x 9.5m. Equip yourself with the gold standard.
Manufacture & Design
- ID: L02841
- 2 Units
- Diameter: 1.0 m (3.3 ft. approx)
- Height: 9.5 m (31 ft. approx)
- ID: L02842
- 2 Units
- Diameter: 1.5 m (4.9 ft. approx)
- Height: 9.5 m (31 ft. approx)
- All Units Skid Mounted
Components & Inclusions
- ASTM A36 Column Shell fabricated in (3) sections
- Infeed Manifold
- Sparger System, including:
- Static Mixer
- Isolation Valve
- Automatic Air Control Instrumentation
- Level Control System, including:
- (2) Pressure Sensors for Level Measurement (One for each column cell)
- Automatic Flow Control Valve
- Isolation Valve
- Wash Water and Launder Flush Systems, including:
- Isolation Valves
- Manual Wash Water Control
- (2) HM150 EHC-S C5 Single Adjust Pumps, Orion Series
- 1 Pump for each 1.5 m dia. column cell (ID: L02842)
- High Chrome Casing and Backliner
- Closed High Chrome Impeller
- Expeller Shaft Seal
- Oversize Shaft with Short Overhand to Minimize Deflection
- Hardened Shaft Sleeve to Protect Shaft and Resist Packing Wear
- Adjustable Self-Contained Bearing Cartridge Assembly
- Combined Lip Seal, V-Ring Seal and Flinger to Prevent Ingress of Contaminants
- Grease Lubricated Heavy Duty Taper Roller Bearings
- Overhead Mounted Motor Base and Guard
- Toshiba 25 HP Motor, 1800 RPM, 3ph, 60 Hz, 460 Volts, 284T Frame, TEFC
Manufacturer Brochure Information
Metso Column Flotation Cells provide superior metallurgical flotation performance for fine ores, high concentrate & froth quality, high availability & high capacity, reduced energy consumption, and small plant footprint.
