9′ X 5′ INGERSOLL-RAND SINGLE DRUM HOIST

Description

9′ X 5′ Ingersoll-Rand Single Drum Hoist, Over Under Wind. Equip Yourself with the Gold Standard.

Manufacture & Design

• Serial #718-B
• Speed
  • Variable up to 980 FPM at 1200 FPM
• Bull: 320
  • Teeth Pinion: 25
  • 12.8/1 Ratio
• Line Pull:
  • 18,000 lbs. at 980 FPM
  • 16,000 lbs. unbalanced load at 1100 FPM (Rim Pull)
  • 29,000 lbs. Line Pull in Counter

Components & Inclusions

• Two (2) Drums on a Shaft, one against another (single drum)
  • One for the Counter Weight and the other for the Skip or Cage
• Two (2) Brake Paths on either side of the Hoist Drum Post Drum Type Caliper Brakes
  • Bearings are Babbitt on the main shaft and pinion is roller bearings
• Gears:
  • Gear on Shaft with Pinion Mounted Separately – Good Condition
  • Bull Gear – Pinion in near new condition (upgraded when installed to new)
• Drive:
  • 500 HP DC General Electric Drive
    • General Electric Thyristor package
• Brakes:
  • Two (2) parallel post drum style brakes
  • Upgraded when installed
• Hydraulics:
  • High pressure with Double Pump Hydraulic Power Pack
• Grooving:
  • Spiral Type
• Controls:
  • Knee Hole Console
  • Model D Logan Controller
  • Series 6 GE PLC (GE Fanuc)
  • Automatic and Manual Operation

History & Notes

• Electrics: 1988
• Used for six years up to 1998
  • Hoisted from a depth of 1,600′

Dimensions

• Drum: 96″ X 60″ Wide.
  • Both drums are equal
• Cable: 1-3/8″ Wire Core
• Flange on Rope Casset: 8″ Deep

Photos

• Available Upon Request