ID: L03161

DRYER, KILN, 6’x50′ REFRACTORY LINED, CS, 2600F, GAS, MINERALS

Quantity: 1

Location

Manufacturer

Allis Chalmers
Subcategories

Rotary Kilns
Add to quote
SKU: L03161 Category:

Description

Dryer, Kiln, 6’X50′ Refractory Lined, CS, 2600F, Gas, Minerals. Equip Yourself with the Gold Standard.

Manufacture & Design

  • Mfg. by:  Allis Chalmers
  • Mfg. Date Approx. 1970
  • Kiln, Horizontal Rotary Drum with Refractory Brick Lining
  • Countercurrent, Burner Fires from Discharge End
  • Diameter:  6′ OD  53″ID
  • Length 50′
  • Shell Construction: CS
  • Lining Construction: Refractory Brick approx.. 9″ Thick
  • Natural Gas Burner,
    • Est. 5-20MM Btu/Hr (to be confirmed)
    • Peabody Eng. Hamworthy Eng Gun Type on Refracting Trolley
    • 1-1/2″ Maxon Double Block and Bleed Micro Ratio Control Valve
    • Pilot Train
    • All on Platform
  • Blower:  20 HP Chicago F1 2000cfm@30″wc
  • Combustion Chamber:  Direct to Drum
  • Temp. approx. 2300°F
  • Driven by 10HP Electric 3/60/440v 1750rpm TEFC.
  • Driven Via:  Bullgear and Pinion via Primary Gear Reducer.  Lufkin D57, 29.311:1, Rated 44HP
    • Second Shaft for Backup Drive motor (not included)
    • 2nd Stage Reducer Lufkin MD912, Ratio 28.7:1, Rated 26HP, 40rpm Input
    • Bullgear Teeth Good Condition.  Bullgear Bolted Section Types
  • RPM:  0.1-3 approx. Pinion Shaft 2rpm
  • Capacity:  2-8 tph approx. Dependant on Product Moisture & Type/Temp, Slope, Residence Time
  • Prior SVC:  2000-2600°F inert Minerals.  Ran until 2012.  Calcined Magnesium Carbonate to form Hard Burned Magnesium Oxide at 2300-2500°F

Notes:

  • Brick Refractory Lining. No Filters or Internal Dams.  Replaced 2009 w/Anchored Castable Against the Shell, 3″US Refractories Litewate 23, Inboard 6″ Sureshot 65A.  Approx. 53″ID, Octagonal Cross Section
  • Shutdown approx.2012.  Relocated for Project that Cancelled, Remains Stored Ready to Ship
  • Cosmoine Coated Running Gear.  Riding Rings Flat, Gears Good to Very Good Condition
  • Includes Combustion Air Blower, Burner and Controls, Drive, Support Trunnions & Rollers, Feed & Discharge Hoods, Drum End Seals
  • System would Require Infeed & Discharge Hoppers, Dust Collection, Feed Screw Conveyor, Product Cooling System, Thermal Oxidizer Dependant on Product.
  • Shipping Size:  8’W x 8’H x 50’L  Weight: Approx. 150000#

Pictures on Request

Related products