Description
150 Yard/hour Trommel Wash Plant with 2 pulsating sluices, spare dryer drum, conveyor, CAT genset, and more. Equip yourself with the gold standard.
Trommel Plant
- 7′ x 28′ Trommel drum
- Full length spray wash bar inside
- 20″ Section with 2″ dia. torch cut holes
- 7′ Section with 1″ x 6″ torch cut slots
- Electric motor & gearbox with chain drive
- Grizzly belt feeder
- Inverted rail grizzly with 10″ spacing
- Hopper: 9′ x 12′ x 4′ deep
- Flat belt conveyor: 30″ wide x 11′ long
- Adjustable hydraulic drive
- (2) – Hydraulic leveling jacks
- Electrical
- 20 Amp full voltage starter
- 30 Amp full voltage starter
- 30 Amp fuseable disconnect
- Dimensions
- Width: 11′
- Length: 43′
- Height: 12′ 3″
- Weight: 35,000 lbs.
Pulsating Sluice – 5′ wide
- 5′ x 179″ x 51″ high
- Wash bars
- 1 HP Baldor motor
- 208-230/460 Volt
- 1140 RPM
- Radicon right angle reducer
- Dimensions
- Width: 8′
- Length: 18′
- Height: 6′
- Weight: 15,000 lbs.
Pulsating Sluice – 22″ wide
- 22″ x 10′ x 20″ high
- 2 HP Baldor motor
- 208-230/460 Volt
- 1750 RPM
- Radicon right angle reducer
- Dimensions:
- Width: 40″
- Length: 11′ 8″
- Height: 20″
- Weight: 1250 lbs.
Sluice Box – 8′ wide
- 8′ x 16′
- Expanded mesh sections
- Riffle section
- Discharge end tapers to 5′ wide
- Dimensions:
- Width: 8′
- Length: 16′
- Height: 30″
- Weight: 4000 lbs.
CAT D330 Genset
- CAT D330 series A diesel engine
- Only a few hours since being overhauled
- 75 KW KATO generator
- 93.8 KVA
- 3 Phase
- 208-240/416-480 Volt
- Single phase
- 50 KW / 62.5 KVA
- 120/240 Volt
- 200 Amp main switch
- (3) Starters
- Dimensions
- Width: 44″
- Length: 7′ 6″
- Height: 62″
- Weight: 6000 lbs.
Conveyor – 30″ x 49.5′
- Truss frame
- 28″ high
- 5″ x 3″ HSS & 4″ x 3″ HSS
- Head pulley
- 10″ dia. x 32″ face
- Rubber lagged
- Tail pulley
- 16″ dia. x 32″ face
- Winged
- Belting
- 2 Ply
- 1/2″ Thick
- Cans 6″ dia.
- Troughing idlers @ 35 degrees
- (2) – Return idlers 6″ dia.
- 10 HP U.S. Electrical motor
- 230/460 Volt
- 1750 RPM
- Dimensions
- Width: 5′
- Length: 52′
- Height: 38″
- Weight: 6000 lbs.
Spare Dryer Drum
- 7′ dia. x 35′ long
- 7/8″ Thick
- 8″ Flange on each end
- Dimensions
- Diameter: 8′ 2″
- Length: 35′
- Weight: 25,000 lbs.
