Dryer, Kiln, 6'X45' Refractory Lined, CS, 2600F, Gas, Afterburner

Location

Manufacturer

Custom

Subcategories

Rotary Kilns

Description

Dryer, Kiln, 6’X45′ Refractory Lined, CS, 2600F, Gas, Afterburner. Equip Yourself with the Gold Standard.

Mfg. by: Custom
Mfg. Date Approx. 2000 approx. (tbc)
Kiln, Horizontal Rotary Drum with Refractory Brick Lining, 2 stage
Co-current, Burner Fires from Feed End. 2nd Stage Afterburner/Thermal Oxidizer Discharge
Diameter: 6′ OD 54″ ID approx.
Length 45′ approx.
Shell Construction: CS
Lining Construction: Refractory Brick approx. 9″ Thick originally
Natural Gas Burner,
- Est. 5-10MM Btu/Hr (to be confirmed)
- 1-1/2″ Double Block and Bleed Control Valve
- Gas Train
Blower: 20 HP approx. 2000cfm@30″wc
Combustion Chamber:
- Main Drum Combustion Chamber at Product Feed End, Direct to Line with Drum Axis.
- Drum Discharge End has Inline Secondary Afterburner Chamber with Dual Eclipse Burners w/Allanson Ignition Transformers 120V/10000V, Natural Gas Train with Double Block Gas Solenoid Valves, NFPA Safety Interlocks.
- Main Gas Line Sensus 243-12NG Pressure Regulator
- Antunes JD-2 Low Gas Pressure and RHLG-A High Gas Pressure Switches
- 24-50″WC, Flame Safeguard w/BMS. Combustion Air Blower.
Temp. approx. 2600°F
Driven by 10HP Electric 3/60/440v 1750rpm TEFC.
Driven Via:
- Gear Reducer with Inline C-Faced Motor.
- Chain Drive Sprocket ‘Pinion” Output, Drives Chain Sprocket with Jackshaft Turning Front and Rear Trunnion Position
RPM: 0.1-3 approx. Pinion Shaft 2rpm
Capacity: 2-8 tph approx. Dependant on Product Moisture & Type/Temp, Slope, Residence Time
Prior SVC: 2000-2600°F Pharma/Chemicals Waste Incineration. In Service until 2018.

Brick Refractory Lining has Internal Surface Wear up to 3″ Deep, Concentric Rippled-looking Grooves
No Lifters or Internal Dams.
Local Control Panels. Installed Outdoors, Mounted on Structural Steel Pedestal Type Frames on Flat Concrete Pad, Frames Moveable but Not Utilized.
Shutdown approx. 2018. One Unit Installed. Identical Spec until Dismantled, Ready to Ship
2Sets Trunnion Rolls 7 Set Thrust Rolls, Riding Rings Appear Very Flat. Trunnion Rolls 20″dia x 8.5″ wide
Support Rolls and Drive Train Appear good to Very Good Condition
2 Identical Systems
Each Kiln, Afterburner, Burner assembly Available as Package (or individually)
Includes Combustion Air Blower, Burner, Pilot, Gas Train and Controls, Drive, Support Trunnions and Rollers, Feed & Discharge End Assemblies
Available Spares/Extra: Crated, Appear Unused, Eclipse Burners with Integrated Combustion Blower (Qty. 2) Baldor Motor 3HP, 3/60/208/230/460v, 3450rpm, Fr146TC, TEFC
Shipping Size: 8’W x 8’H x 50’L Weight: Approx. 150000#